Flag-of-Spain

Xpeak

Xpeak_R

Rackmount User Panel

Xpeak_IF

Audio and Control Interface

Xpeak_BP

Wired Beltpack

Xpeak_D

Desktop User Panel

Xplorer

Wireless Beltpack

Distributed Global Intercom System

Technical coordination within a Broadcast Production team is essential. Xpeak Intercom System has been developed with technology providing the highest quality interconnecting circuits in the simplest way possible. With Xpeak, you can forget about complicated communications and totally focus on the production.

Intercom System without Matrix

Cloud based
System

With focus on TV Production

Optimized for Remote Production

A Real Game Changer for Broadcast Productions

Thanks to its advanced virtual network system, Xpeak is perfect for remote production and when part of the team is working remotely. Connections and start-ups are simplified to a maximum. Equipment and terminals are automatically located, even without being on the same network, allowing for simple and agile interconnections.

Smart Connection

Up to 28 user terminals

Full crosspoint functionality

Pre-set Party Line setup mode

IP, USB and Bluetooth connectivity

8×4 way levers for improved logic

HD Voice audio quality

Low Binary Rate and Latency

Work without matrix

Xpeak supports three modes of operation. The virtual matrix mode enables the elements of the system to form a network of peer-to-peer devices with ethernet virtualization. The 4-channel Party Line mode determines which channels are to be used for communications by each User panel. In addition, the Xpeak panels can work with other AEQ Intercom Systems: with Conexia and Crossnet matrixes or EasyNet Party Line.

Xpeak_D

Desktop User Panel

Xpeak_D desktop user panels are the perfect choice in desktop environments. Its 8 4 way levers acting as 16 virtual keys facilitating their use, with functionalities of Talk-Listen and Volume.

The signalling of functionalities through displays speeds up the handling of the equipment. The LEDs arranged on the levers show the communication groups in a simple and clear way.

With USB and Bluetooth connectivity for headsets, this latter also allows you to make and receive calls from a smartphone.

The Xpeak_D panels have a double Ethernet connector for star connection to a switch, or if required, to daisy-chain the user panels.

Xpeak_BP

Wired Beltpack

Xpeak_BP is the new generation of wired belt-pack for Xpeak global distributed intercom system. The Xpeak_BP belt-packs have 4 cross-point keys on two pages and are PoE powered. Just as the rack-mounted and desktop panels, they have a Bluetooth and USB connection, compatible with a wide variety of Headset combinations.

Like the rest of the panels, Xpeak_BP can be integrated into existing large intercom systems that work as user panels or terminals for the AEQ Conexia or Crossnet matrix systems.

Xpeak_R

Rack User panel

The Xpeak_R rack-mounted user panels will communicate with its peers as well as with the rest of the panels and interfaces of the Xpeak family. It doesn’t matter whether they are in the same local network or at different locations with internet or a virtual network access. Its 8 4 way levers acting as 16 virtual keys and simplify operation compared to other terminals. The signalling of functionalities through displays speeds up the handling of the equipment. The LEDs associated to the levers show the communication groups in a simple and clear way.

Xpeak uses USB connectors for headsets and are provided with Bluetooth connectivity. This allows for wireless headset connection to the Xpeak_R panels and also makes it possible to make and receive calls from a smartphone.

The Xpeak_R panels have a double Ethernet connector. This allows for star connection to a switch, or if required, to daisy-chain the user panels.

Xpeak_Virtual

Xpeak_IF

Xplorer


Xplorer

Wireless Beltpack

The wireless intercom belt-packs with WiFi technology, Xplorer, have a working mode compatible with Xpeak. They have 4 cross-point keys on two pages (8 virtual keys) and have rechargeable batteries with autonomy of 20 hours.


Xpeak_IF

Audio and control Interface

The Xpeak_IF interface provides bidirectional interconnectivity with the Xpeak system to 4 external audio sources in analogue, digital USB, or AoIP Dante/AES67 formats.

A perfect complement to work with camera or PA systems, RF intercoms, Audio mixing consoles and other. It also adds 4 GPIs and 4 GPOs to the system.

Xpeak_Virtual

Virtual User Panel

Xpeak_Virtual user panels are PC applications for Windows. Ideal for users that need to stay coordinated while working intensively with a PC on which the application is integrated. In this way, the user can combine the operation and coordination from a window on computer display or from an external, generic programmable keypad.

Products

Xpeak_R

Rack User panel

The Xpeak_R rack-mounted user panels will communicate with its peers as well as with the rest of the panels and interfaces of the Xpeak family. It doesn’t matter whether they are in the same local network or at different locations with internet or a virtual network access. Its 8 4 way levers acting as 16 virtual keys and simplify operation compared to other terminals. The signalling of functionalities through displays speeds up the handling of the equipment. The LEDs associated to the levers show the communication groups in a simple and clear way.

Xpeak uses USB connectors for headsets and are provided with Bluetooth connectivity. This allows for wireless headset connection to the Xpeak_R panels and also makes it possible to make and receive calls from a smartphone.

The Xpeak_R panels have a double Ethernet connector. This allows for star connection to a switch, or if required, to daisy-chain the user panels.

Xpeak_D

Desktop User Panel

Xpeak_D desktop user panels are the perfect choice in desktop environments. Its 8 4 way levers acting as 16 virtual keys facilitating their use, with functionalities of Talk-Listen and Volume.

The signalling of functionalities through displays speeds up the handling of the equipment. The LEDs arranged on the levers show the communication groups in a simple and clear way.

With USB and Bluetooth connectivity for headsets, this latter also allows you to make and receive calls from a smartphone.

The Xpeak_D panels have a double Ethernet connector for star connection to a switch, or if required, to daisy-chain the user panels.

Xpeak_BP

Wired Beltpack

Xpeak_BP is the new generation of wired belt-pack for Xpeak global distributed intercom system. The Xpeak_BP belt-packs have 4 cross-point keys on two pages and are PoE powered. Just as the rack-mounted and desktop panels, they have a Bluetooth and USB connection, compatible with a wide variety of Headset combinations.

Like the rest of the panels, Xpeak_BP can be integrated into existing large intercom systems that work as user panels or terminals for the AEQ Conexia or Crossnet matrix systems.

Xpeak_Virtual

Virtual User Panel

Xpeak_Virtual user panels are PC applications for Windows. Ideal for users that need to stay coordinated while working intensively with a PC on which the application is integrated. In this way, the user can combine the operation and coordination from a window on computer display or from an external, generic programmable keypad.


Xpeak_IF

Audio and control Interface

The Xpeak_IF interface provides bidirectional interconnectivity with the Xpeak system to 4 external audio sources in analogue, digital USB, or AoIP Dante/AES67 formats.

A perfect complement to work with camera or PA systems, RF intercoms, Audio mixing consoles and other. It also adds 4 GPIs and 4 GPOs to the system.


Xplorer

Wireless Beltpack

The wireless intercom belt-packs with WiFi technology, Xplorer, have a working mode compatible with Xpeak. They have 4 cross-point keys on two pages (8 virtual keys) and have rechargeable batteries with autonomy of 20 hours.

Xpeak is the true plug-and-play intercom solution. The hardware or software panels are interconnected to virtual networks acting as if they all resided in the same physical production centre.

Whether or not they are on the same LAN, or scattered in different locations with access to the Internet or a WAN, the Xpeak system allows your devices to auto-discover each other, even without being previously subscribed to the network. This absolutely facilitates the implementation of local and delocalized intercom systems with different venues, according to the specific needs of the production or event.

Smart connection for simply intercommunications

A world of functionalities in one system

Xpeak works connected to virtual networks
Xpeak works connected to existing VPNs
Xpeak works connected to remote audiocodecs

Increase your possibilities with

the Xpeak Control Software

Ready-to-work system

Xpeak devices auto-detect themselves when connected to a switch or the Internet, no configuration is required, they are ready to use.

Configures and Monitors

Usually each workstation needs to be labelled and configured according to its role. With the Xpeak Control Software, and its intuitive interface, all user panels are accessed and their keys and communication flows are customised.

Full control of the system

In addition, the software allows the devices to be operated as if it were physically in front of them, enabling the monitoring and control of all coordination through this platform.

Operates in multiple scenarios

The simplicity of Xpeak and the large number of pieces of equipment that a system can integrate make it ideal for any scenario that comes to mind in which the coordination of the human team is essential.

In addition to remote productions of all kinds, such as sporting, social or political events; or coordination of different workplaces, such as emergency rooms or TV and radio production; it is especially recommended for all kinds of local coordination requiring up to about 30 users, such as: TV, film and theatre productions, concerts, leisure such as amusement parks or cruise ships, corporate or industrial centres such as airports, hospitals…

Technical Details

Xpeak_R and Xpeak_D
  • Ergonomics:
    – 8 x 4-way cross-point levers with associated RGB led.
    – 2 screens for menu and contextual information associated with the levers.
    – Rotary encoder, menu key and signalling LEDs.
    – Internal power supply.
    – Internal 1Gbps Ethernet switch, with two external RJ45 network ports to connect panels in “Daisy Chain” to a single switch port.
    – GPIO: 10-pin mini-Hartmann connector includes 2 opto-coupled GPIs and 2 GPOs, one external circuit power pin, and ground.
    – Bluetooth: The equipment incorporates a Bluetooth connection as an audio interface with a telephone or headset.
    – Front audio:
        – Gooseneck electret microphone supplied with the panel.
        – Internal speaker that develops 84 dB SPL @ 1 m.
    – USB Audio:
        – Front USB for headsets.
        – Rear USB Type B: To incorporate PC audio.
    – Bluetooth audio: The equipment can be paired with a Bluetooth device, for example a headset or a smartphone.
  • It combines audio signals that arrive at the equipment from the diferent devices.
  • Dimensions:
    – Xpeak R: 482.6 x 44.5 mm. Depth 103 mm.
    – Xpeak D: 217 x 105 mm. Depth 101 mm.
  • Functional:
    – Talk, listen and volume on each lever for a crossover point.
    – Lever paging: 2 pages of levers, total 16 virtual levers.
    – Echo cancellation process.
Xpeak_BP
  • Ergonomics:
    – 4 cross-point keys with associated RGB led.
    – Screen for menu and contextual information associated with the keys, with ON and OFF function.
    – Two rotary encoders for volume.
    – Two menu keys.
    – USB: 1 rear USB connector for headset.
    – Bluetooth for audio interface with a phone or headset.
    – Ethernet network connection. RJ45 connector with interlocking.
    – PoE power supply.
    – GPO: One GPO output through two pins.
    – Mechanics: Anti-shock plastic belt-pack.
  • Dimensions: Front: Width: 92 mm. Depth: 70 mm. Height: 130 mm.
  • Functional:
    – Keys pagination: 2 pages, total 8 virtual keys.
    – Echo cancellation.
    – Group LEDs: The LEDs that accompany each key have a programmable color to indicate the group to which each key belongs.
    – Front light signalling of incoming call.
    – The signalling of the key and communication status is carried out in the
    quadrant corresponding to each key in the idle screen of the display.
Xpeak_IF
  • 4 Channel audio I/O converter for analog, USB and AoIP Dante / AES67 to 4 bidirectional G722 encoded channels that integrates with the virtual matrix or the party-line system.
  • USB connection: The 4 USB audio ports are type B and allow you to connect audio from a PC.
  • Ethernet connection: internal switch with two external network ports. Different uses: daisy chain, separation between Dante audio and encoded audio + Control.
  • GPIO: Mini-Hartmann connectors include 4 opto-coupled GPIs and 4 GPOs, external power pin and ground.
  • 1.54” color TFT screen: allows information such as IP address, audio presence and status to be displayed.
  • Encoder and menu key to navigate the user interface and facilitate configuration and status viewing.
Xpeak_Virtual
  • Virtual user panel.
  • PC software.
  • Windows operating system.
  • 8 virtual crossover keys.
  • Compatible with Xpeak in all work modes. 
Xplorer
  • Ergonomics:
    – 4 cross-point keys with associated led.
    – Screen for menu and contextual information associated with the keys.
    – Two rotary encoders for volume and menu navigation.
    – Two menu keys.
    – Rear connector for specific headset.
    – Ethernet network connection via WiFi.
    – Power through rechargeable batteries. 20 hours of operation.
    – Recharge at the charging station.
    – Mechanics: Anti-shock plastic belt-pack.
  • Dimensions: Front: Width: 92 mm. Depth: 70 mm. Height: 130 mm.
  • Functional:
    – Internal programming of the Xpeak functionality.
    – On-screen display of Xpeak status and menus.
    – 2 pages of keys, total 8 virtual keys.
    – SDN support for virtual network.
    – Group LEDs: User group On-screen signalling.
    – Party Line operating mode with high quality audio G722.
    – Virtual Matrix operating mode with high quality audio G722.
    – Local reprogramming of keys in virtual matrix mode.

Related Products

Stay in the loop